Off-Road Wheel Balancing Solutions

Off-Road Centering Kit

QuickPlates	Flange Plates	Duo Plates	QuickNuts
Cones	AirGo Lift	Light Truck Kit	Upgrade Shafts
Haweka QuickPlates: Haweka’s QuickPlate System replaces traditional “finger or flange plates” with planetary gears which rotate the built-in studs to center on the wheel perfectly. No more searching out-of-date charts for correct stud spacing. The QuickPlate is made for all 4,5, and 6 lug wheels. With a simple twist, the QuickPlate System matches the wheel lug-hole pattern of any passenger car, SUV or light truck. With the Haweka Pro-Loc System™, you can be sure that the bolt pattern will be locked in. This makes set up fast, easy and accurate.
QuickPlates (Product Information PDF)			Back to top
Haweka Flange Plates: Haweka uses a coded system making it easy to locate each bolt pattern on the flange plate. Four different flange plates available in order to meet all your needs.
Flange Plates (Product Information PDF)			Back to top
Haweka Duo Plates: With the introduction of the Duo Plate, Haweka brings several new features which are unsurpassed in accuracy and functionality. Each flange plate now has a replaceable color coded, silver face, an all new design of the stud bore and studs which produce absolute zero tolerance once locked into place, and an all new tolerance free clamping collet feature to the center bore of the Duo Plate virtually eliminating remount errors.
Duo Plates (Product Information PDF)			Back to top
Quick Nuts: Available for any BALANCER shaft/thread combination! (28x3, 28x3.5, 28x8.466P2, 30x3, 36x3, 38x3, 40x3, 40x4, 40x8.466P2)
QuickNuts (Product Information PDF)			Back to top
Cones: Wheel balancer accessories are critical to accurate balancing. Cones get worn down by friction over time. They must be replaced regularly. Wear and tear on cones could be the problem for not getting repeatability on your balancer. Haweka accessories can make an older balancer work better than it did when it was new.
Cones (Product Information PDF)			Back to top
AirGo Lift (Wheel Lift): The ideal accessory for tire service. This special unit lifts and settles heavy tires on the balancer.The Airgo Lift allows you to achieve the most precise positioning of the tire on the balancer shaft. The tier is always correctly clamped. In addition, there is no strain on the tire by the shaft during the clamping process. You get perfect results due to the distortion-free connection. The AIRGO Lift is operating on compressed air. No electrical connection necessary!
AirGo Lift (Product Information PDF)			Back to top
Light Truck Cone Kit: With the large number of light trucks on the road, tire stores across the country are demanding proper tooling for balancing these larger wheels. Haweka USA meets these demands with The Haweka Light Truck Kit. The cone and spacer in the Light Truck Kit are designed to fit all domestic ¾ ton pickups and medium duty fleet trucks. Talk to your customers about expanding their customer base to fleets and larger passenger trucks. The Haweka Light Truck Kit is just one of many products we offer to improve the product range and balancer accuracy for tire shops of all sizes. Haweka offers accurate solutions to your most difficult balancing problems.
Light Truck Kit (Product Information PDF)			Back to top
Upgrade Shafts: Shafts are available for EVERY brand and model balancer in the USA. Upgrade shafts from 28mm to 40mm shafts for more support for today's larger wheels. Longer shafts are also available to accomodate more tooling options.
Upgrade Shafts (Product Information PDF)			Back to top
Off-Road Centering Kit: Great for balancing off-road vehicle wheels. The off-road kit comes with two flange plates, two sets of studs, one wallboard, distance ring with magnets, donut spacer, wall chart and a DVD.
Off-Road Centering Kit (Product Information PDF)			Back to top

Back to Balancing Products Back to Product Information

866.442.9352